How to refinish carbon fiber parts

1 Wash the parts to be refinished to remove surface dirt, as the hard silica can leave scratches in the finish.
2 Remove the layer of surface oxidation and heavier scratches with a microfiber cloth and a medium-duty polishing compound, such as Scratch X. Work the polish in with overlapping 8-inch diameter circles. Be careful not to apply too much pressure, as it's not difficult to wear thin spots in the clear coat.
3 Wait for the polish to dry, then buff with a clean towel.
4 Polish the surface further with a high-quality product. Using a good polish is very important on carbon fiber, as the dark color, depth of the weave and several coats of clear hide nothing. Work the polish in gently with overlapping circles using a clean towel.
5 Wait for the polish to dry, then buff with a clean towel.
6 Wax using the highest quality product available with---you guessed it, a clean microfiber towel. Avoid using spray-on waxes (remember, the carbon fiber's clear coat hides nothing).
7 Allow 10-15 minutes to dry, away from direct sunlight. Buff with a clean towel. Repeat waxing if desired.